2024 Grasshopper MidMount™ 300G Series 328G4 EFI 61
- Year 2024
- Make Grasshopper
- Model MidMount™ 300G Series
- Engine Briggs & Stratton Vanguard Delphi®-based closed-loop V-Twin
2024 Grasshopper MidMount™ 300G Series 328G4 EFI 61
2024 Grasshopper MidMount™ 300G Series 328G4 EFI 61
Power, efficiency and economy. The 328G4 is equipped with a vertical crankshaft Electronic Fuel Injection (EFI) Briggs & Stratton Vanguard engine that continuously adjusts fuel ratios while using less fuel. EFI engines provide reliable hot and cold starts, reduce emissions and minimize fuel-induced service issues.
Features may include:
- B & S Vanguard Electronic Fuel Injection (EFI Engine) Engine
- Hydro-Gear ZT-4400 Transmission
- Heavy-duty Deck
- QuikAjust® Drop Pin Height Adjustment
- Ultimate Operator Station™
- Warranty
- Reduced Maintenance
- Vigilant Operator Presence System™
- Rugged Construction
- QuikAjust Tilt™ Levers
Engine
Engine
Briggs & Stratton Vanguard Delphi®-based closed-loop V-Twin
Displacement
49.4 cu. in. (810cc)
Lubrication
Pressure Lube/Filter
Cooling
Air
Air Cleaner
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Starter
Solenoid shift
Ignition
Breakerless
Fuel System
Fuel Injection
Electronic
Fuel Type
Gasoline - unleaded
Drivetrain
Transmission
Heavy-duty Hydro-Gear ZT4400 hydrostatic transmissions with cooling fans, integrated transaxles with 12cc piston pumps and 16cc piston motors, gear reduction, internal disc brakes, and 1-3/8-inch axles | Filtration/Hydro: Self-contained fluid and internal filtration. CoolTemp HydroMax® fluid withstands high and low temperature extremes for extended service intervals after 100-hour break-in oil change.
Steering
One- or two-hand operation with adjustable Hydra-Smooth™ dual levers that automatically return to neutral from either forward or reverse position.
Suspension
Suspension
InFrame™ suspension with iso-mounted seat and footrest
Brakes
Brake System Type
Dynamic braking through hydrostatic transmission.
Parking Brake
Internal disc brake in transmission.
Wheels & Tires
Wheels
Drive: 24x12.00x12 turf, 4-ply rated
Tires, Front Specification
13x6.50x6; rib tread, pneumatic with greasable, double-sealed bearings to protect from grass wrap.
Battery
Battery
Maintenance-free: 12 Volt
Operational
Operating Speed
Forward: 0 - 10.5 mph (0 - 16.9 kph) | Reverse: 0 - 6.0 mph (0 - 9.7 kph)
Chassis
Underhood Muffler
Ultra quiet, single, industrial type.
Dimensions
Height
Cutting Range: 1.0 to 5.0 in. (2.5cm to 12.7 cm) | Seat Back: 49.5 in. (125.7 cm) | Seat Cushion: 33.0 in (83.8 cm) | ROPS: 70.0 in. (177.8 cm)
Dimensions
Blades: 21 in. (53.3 cm)
Spindle Diameter
8 in. (20.3 cm)-diameter housing with 6-bolt pattern. Machined aluminum housing on 52- and 61-inch decks. Cast iron on 72-inch deck.
Length
Midmount w/ DuraMax® Deck - Mowing Position: 85.0 in. (215.9 cm)
Width
Deck Side Discharge: 74.5 in. (189.2 cm) | Deck Mulch: 62.5 in. (158.8 cm)
Capacities
Fuel Capacity
13 U.S. Gal. (49.2 l)
Weights
Weight
Uncrated: 1190 lbs (539.8 kg) | Mulching Package: 36 lbs. (16.3 kg)
Features
Features
Crankshaft: Vertical | Blade Drive: Belt drive with single Kevlar V-belt and idler arm tensioning. | Interlock System: Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral. | Console-mounted Instruments: Low engine oil pressure and parking brake warning lights, combination electronic fuel gauge/hour meter, ignition and push/pull PTO switches. Choke integrated with throttle lever. | Turning Radius: True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
Construction Material
Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick- more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-edge design with 0.5 in. (12.7 mm) reinforcement on front edge of deck.
Spindle Type
Assemblies: Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Seat Type
Iso-mounted Premium Comfort Seat. Features include a high-back, deep-cushioned, foam-padded Cordura®-covered, padded arm rests, padded backrest with lumbar support, coil-spring suspension and embroidered Grasshopper logo on seat back.